12V 100Ah AGM Deep Cycle Battery V2

This product has an absorbent glass mat embedded in the structure of the plates. (There are 6 sets of plates, each 2.0V which makes up a “battery” of plates, i.e. 12V). The mat does two things. It reinforces the lead frame of each plate, or cell, and it stops the plates from buckling under heavy discharge current). By helping make the innards of the battery virtually solid, you can mount it in any position, but it is still preferable, of course, to mount the battery upright, even for the sake of convenience of terminal access. They are an excellent product. 

Note: It is important to not discharge an AGM more than 60% between recharge.

Standard Recharge Current	10A
Recharging Time	10hr
Leakage Properties	91% charge after 3 months; 82% charge after 6 months; 64% charge after 12 months

Peak Discharge Duration	5sec
Battery Chemical Composition	Deep Cycle AGM
Battery usage	Bulk Storage
Battery Peak Current	500A
Amp Hour Rating	100Ah
20 Hour Capacity	103Ah
10 Hour Capacity	100Ah
5 Hour Capacity	80Ah
1 Hour Capacity	63Ah
Connection Type	M8 Bolt/Nut
Type of battery	SLA Block

DC Voltage

12V

Weight	28.4kg
Length	330mm
Width	172mm
Height	217mm